HDPE Geomembrane for Landfill

Thickness: 0.2mm-3.0mm(Main:0.5mm, 0.75mm,1.0mm,1.5mm,2.0mm)
Length : 50m/roll,100m/roll,150m/roll or follow your request
width: 1m-8m or follow customers' demand, Main width is 4m,5m,5.8m,6.0m
Surface Both side smooth/both side textured
one side textured one side smooth, or as your request
Color: White,Black,Green,Blue,mainly black
Material: HDPE,LDPE,LLDPE, ( 100% Virgin)
Certification: ISO9001:2008,CE
Standard: ASTM GRI-GM13Thickness: 0.2mm-3.0mm(Main:0.5mm, 0.75mm,1.0mm,1.5mm,2.0mm)
Length : 50m/roll,100m/roll,150m/roll or follow your request
width: 1m-8m or follow customers' demand, Main width is 4m,5m,5.8m,6.0m
Surface Both side smooth/both side textured
one side textured one side smooth, or as your request
Color: White,Black,Green,Blue,mainly black
Material: HDPE,LDPE,LLDPE, ( 100% Virgin)
Certification: ISO9001:2008,CE
Standard: ASTM GRI-GM13

Availability:

Quantity:



Inquire Add to Basket

Model:
0.2-2.5mm
Brand:
INNO
Code:
3920109090

Product Description

Manufacturing Technique

HDPE Geomembrane liner are made from polyethylene polymer materials by the film-blowing process.it is most widely
used for solid waste containment (such as landfill liners),mining and water containment applications.

1.Waterproof and impermeable
2.UV resistance
3.High tearing resistance
4. Puncture-resisting
5.Nontoxic,non-tasteness.Long life:over 100 years underground without sunlight.

Application

1.Various waterproof and anti-seepage projects such as landfills,solid waste treatment stations,tailings storage yards
2.sewage ponds,petrochemicals, construction, water conservancy,mining,landscape gardens,subway tunnels,
aquaculture,livestock biogas digesters, etc.
3.Environmental protection projects:Landfill,sewage treatment plants,power plant regulating pools,industrial and hospital solid wastes,etc.
4.Mining:heap leaching platforms, conduit and retention channels and wells for liquid solutions, , final disposal reservoirs.

S/N	Item	Index
S/N	Thickness mm	0.75	1.00	1.25	1.50	2.00	2.50	3.00
1	Density g/cm3	≥0.940
2	Tensile yield strength (vertical and horizontal) N/mm	≥11	≥15	≥18	≥22	≥29	≥37	≥44
3	Tensile breaking strength (vertical and horizontal) N/mm	≥20	≥27	≥33	≥40	≥53	≥67	≥80
4	Elongation (vertical and horizontal) %	-	-	-	≥12
5	Elongation at break (vertical and horizontal) %	≥700
6	Tearing load at right angle (vertical and horizontal) N	≥93	≥125	≥160	≥190	≥250	≥315	≥375
7	Anti-puncture strength N	≥240	≥320	≥400	≥480	≥540	≥800	≥960
8	Tensile load stress cracking (tensile method of dead load of the cut) h	_	≥300
9	Carbon black content %	2.0~3.0
10	Carbon black dispersion	The number of Level 3 among 10 data is not more than one; Level 4 and Level 5 are not allowed.
	Oxidation induction time (OIT) min	Oxidation induction time under normal pressure ≥100
11	Oxidation induction time (OIT) min	Oxidation induction time under disjoining pressure ≥400
12	85°C thermal aging (retention rate of OIT under normal pressure after 90d) %	≥55
13a	Ultraviolet resistance (retention rate of OIT after 1600h ultraviolet irradiation) %	≥50
Note: Technical performance index of thickness specification not listed in the table shall be implemented according to interpolation method.
For two indexes of Item 11 and Item 13, select one from retention rate of OIT under normal pressure and retention rate of OIT under high pressure and carry out the test.